Shipping throughout Russia and to other countries

Oilfield pumps Tambovpolimermas NPC-32, NB-125, N3P-25, etc.

The NPC-32 cementing pump is used to complete mobile and stationary pumping units designed for pumping cementing, clay and other flushing and selling solutions into oil, gas and other wells during their drilling or repair.

The NB-125 drilling pump is designed for pumping petroleum products and for pumping flushing solution into wells during geological exploration, structural prospecting drilling, as well as during other flushing operations during major repairs of oil and gas wells.

The single-acting three-piston pump N3P-25 is designed for pumping washing liquid and drilling mud under high pressure into a well during geological exploration and production drilling, as well as for pumping various non-aggressive technological media into oil and gas wells.

The 3PN-70 three-plunger pump is used to complete mobile and stationary pumping units designed for pumping various technological liquid media during hydraulic fracturing, hydraulic jet perforation, treatment of bottomhole zones and other flushing and selling operations, for reservoir pressure maintenance systems carried out in oil, gas and injection wells.

The 3PN-32 three-plunger pump is used to complete mobile and stationary pumping units designed for pumping various technological liquid media, including a mixture of inhibited acids, during hydrochloric acid treatments of bottomhole zones and other flushing and selling operations carried out in oil, gas and injection wells.

The 3PN-20 three-piston pump is designed for pumping various liquids in temperate cold and temperate climatic regions according to GOST 16350-80.

The 3KPm gearbox is used in pumping units of the type UN-450x700, UNR-320x250 with a high-pressure pump drive from a diesel engine. It is designed to select the optimal engine operation mode for a given pump operation mode by shifting gears.

Three-plunger pump PT.1-2,5/125-D1. The main purpose is as a feed pump for water supply in steam generator sets used for dewaxing oil wells. It can be used for pumping various liquids that are chemically resistant to the materials of the hydraulic part of the pump, with a temperature of up to 100 °With a kinematic viscosity of not more than 8 cm3 / s; the permissible mass fraction of solid non-abrasive particles in liquids is not more than 0.2% by weight, the permissible dimensions are not more than 0.2 mm.

Catalog

All Tambovpolimermas products

The group "New Technologies" offers for review the products of the plant Tambovpolimermas: oilfield, agricultural equipment, gearboxes and special drives, equipment for tire, metallurgical, aluminum, chemical and electrode plants, for the production of RTI, construction.
SPARE PARTS ARE NOT ON SALE
  • Pumping units Tambovpolimermas
    Pumping units
    UNB-125x320, UNR–200x170, etc.
  • Oilfield pumps Tambovpolimermas
    Oilfield pumps
    NPC-32, NB-125, N3P-25, etc.
  • Gas booster installations Tambovpolimermas
    Gas booster installations
    GBU(B) 65/25, GBU(D) 12/25, etc.
  • Parts and assembly units Tambovpolimermas
    Parts and assembly units
    To N3P-25, UNB1-125-320U, etc.
  • Formers-vulcanizers Tambovpolimermas
    Formers-vulcanizers
    To N3P-25, UNB1-125-320U, etc.
  • Reactor-mixing plants. Tambovpolimermas
    Reactor-mixing plants.
    ANODE-400, CMC – 200, etc.
  • Agricultural equipment Tambovpolimermas
    Agricultural equipment
    Sch1-POB-3, P5.21.00, etc.
  • Gear units Tambovpolimermas
    Gear units
    F1P, D H9, D1, etc.
  • Special drives Tambovpolimermas
    Special drives
    RSK-12.02.15.000, EP.A5004, etc.
  • Gear motors Tambovpolimermas
    Gear motors
    MP3-800, MPV, MP4-780, etc.
  • Mixers Tambovpolimermas
    Mixers
    Paronite - 2000, SP-800 A, etc.
  • Powder Heaters Tambovpolimermas
    Powder Heaters
    PPD9, PPD10, PPD11, etc.
  • Screw machines Tambovpolimermas
    Screw machines
    ASH-90 E, etc.
  • Vulcanization presses Tambovpolimermas
    Vulcanization presses
    250-800 1E, 500-1200 1E, etc.
  • Aggregates for RTI production Tambovpolimermas
    Aggregates for RTI production
    ARC MG-90A, NG-2, etc.
  • Aggregates for construction Tambovpolimermas
    Aggregates for construction
    SNA-40, NB-500, etc.

About Tambovpolimermas

The Tambovpolymermash plant (Tambov) has been holding a leading position in the production of equipment for polymer manufacturers on the territory of the Russian Federation for more than 56 years. The constant development and improvement of models allows us to supply the plant's products to enterprises in Russia, the CIS and a number of foreign countries. Currently, the nomenclature of the Tambovpolymermash plant includes more than 100 product names.

  • POLYMER EQUIPMENT

    Since 1958, the plant has been engaged in the manufacture of polymer equipment. Various branches of the national economy are equipped with vulcanizers, presses, rollers, mixers of periodic and continuous action: aluminum, metallurgical, etc.

  • GEAR MANUFACTURING

    Today, it is possible to produce gearboxes – horizontal, cylindrical, planetary-of any design and transmission, drives for wind power plants, any original drives for chemical equipment.

  • OIL INDUSTRY

    Since 1986, the plant has been producing oilfield equipment: turbo drills, installations of submersible electric pumps and drives to rocking machines. Now the plant produces more powerful pumps – cementing and acid pumps, which are widely used in the oil and gas industries.

Information Board Tambovpolimermas

Learn more about our products Tambovpolimermas.
  • Equipment catalog of Tambovpolymermash на сайте Тамбовполимермаш
    Equipment catalog of Tambovpolymermash

NEW TECHNOLOGIES GROUP

For sales and support please contact
Send your question now: