Shipping throughout Russia and to other countries

Vulcanization presses Tambovpolimermas 250-800 1E, 500-1200 1E, etc.

Hydraulic vulcanization press 250-600 (1E, 2E, 4E, 2P, 4P) is designed for molding and vulcanization of rubber and asbestos products. The technological parameters of the presses allow them to be used not only for the production of rubber-technical products, but also products made of various plastics and other molded materials.

Hydraulic vulcanization press 250-800 (1E, 2E, 4E) is designed for molding and vulcanization of rubber and asbestos products. The technological parameters of the presses allow them to be used not only for the production of rubber-technical products, but also products made of various plastics and other molded materials.

Hydraulic vulcanization press 250-800 1E. The press with maximum plate heating up to 550 ° C is designed for straightening and tempering parts, as well as pressing parts.

Hydraulic vulcanization press 250-1200 1E is designed for molding and vulcanization of rubber and asbestos products. The technological parameters of the presses allow them to be used not only for the production of rubber-technical products, but also products made of various plastics and other molded materials.

Hydraulic vulcanization press 500-1200 1E is designed for molding and vulcanization of products made of rubber, rubber-asbestos mixtures, plastics and other molded materials. Suitable for the manufacture of parts for the defense industry.

Hydraulic vulcanization press with vacuum chamber PV 350-700x700 is designed for molding and vulcanization of rubber products.

The jaw press 160-600 1E is designed for molding and vulcanization of shaped rubber-technical products.

The jaw press 400-(1400x700) 2E is designed for vulcanization of shaped rubber products.

Jaw press 250-1260x600 2P with a tensioning device, designed for vulcanization of shaped rubber products.

The hydraulic vulcanizing press for truck tires 6475 HP is designed for forming and vulcanizing tires of radial design with a landing diameter from 19.5" to 22.5" in sector molds of two-phase action.

Hydraulic vulcanizing press for passenger tires 4530 RH/1 is designed for forming and vulcanizing tires of radial design with a landing diameter from 13.0" to 17.5" in two-phase sector molds.

Catalog

All Tambovpolimermas products

The group "New Technologies" offers for review the products of the plant Tambovpolimermas: oilfield, agricultural equipment, gearboxes and special drives, equipment for tire, metallurgical, aluminum, chemical and electrode plants, for the production of RTI, construction.
SPARE PARTS ARE NOT ON SALE
  • Pumping units Tambovpolimermas
    Pumping units
    UNB-125x320, UNR–200x170, etc.
  • Oilfield pumps Tambovpolimermas
    Oilfield pumps
    NPC-32, NB-125, N3P-25, etc.
  • Gas booster installations Tambovpolimermas
    Gas booster installations
    GBU(B) 65/25, GBU(D) 12/25, etc.
  • Parts and assembly units Tambovpolimermas
    Parts and assembly units
    To N3P-25, UNB1-125-320U, etc.
  • Formers-vulcanizers Tambovpolimermas
    Formers-vulcanizers
    To N3P-25, UNB1-125-320U, etc.
  • Reactor-mixing plants. Tambovpolimermas
    Reactor-mixing plants.
    ANODE-400, CMC – 200, etc.
  • Agricultural equipment Tambovpolimermas
    Agricultural equipment
    Sch1-POB-3, P5.21.00, etc.
  • Gear units Tambovpolimermas
    Gear units
    F1P, D H9, D1, etc.
  • Special drives Tambovpolimermas
    Special drives
    RSK-12.02.15.000, EP.A5004, etc.
  • Gear motors Tambovpolimermas
    Gear motors
    MP3-800, MPV, MP4-780, etc.
  • Mixers Tambovpolimermas
    Mixers
    Paronite - 2000, SP-800 A, etc.
  • Powder Heaters Tambovpolimermas
    Powder Heaters
    PPD9, PPD10, PPD11, etc.
  • Screw machines Tambovpolimermas
    Screw machines
    ASH-90 E, etc.
  • Vulcanization presses Tambovpolimermas
    Vulcanization presses
    250-800 1E, 500-1200 1E, etc.
  • Aggregates for RTI production Tambovpolimermas
    Aggregates for RTI production
    ARC MG-90A, NG-2, etc.
  • Aggregates for construction Tambovpolimermas
    Aggregates for construction
    SNA-40, NB-500, etc.

About Tambovpolimermas

The Tambovpolymermash plant (Tambov) has been holding a leading position in the production of equipment for polymer manufacturers on the territory of the Russian Federation for more than 56 years. The constant development and improvement of models allows us to supply the plant's products to enterprises in Russia, the CIS and a number of foreign countries. Currently, the nomenclature of the Tambovpolymermash plant includes more than 100 product names.

  • POLYMER EQUIPMENT

    Since 1958, the plant has been engaged in the manufacture of polymer equipment. Various branches of the national economy are equipped with vulcanizers, presses, rollers, mixers of periodic and continuous action: aluminum, metallurgical, etc.

  • GEAR MANUFACTURING

    Today, it is possible to produce gearboxes – horizontal, cylindrical, planetary-of any design and transmission, drives for wind power plants, any original drives for chemical equipment.

  • OIL INDUSTRY

    Since 1986, the plant has been producing oilfield equipment: turbo drills, installations of submersible electric pumps and drives to rocking machines. Now the plant produces more powerful pumps – cementing and acid pumps, which are widely used in the oil and gas industries.

Information Board Tambovpolimermas

Learn more about our products Tambovpolimermas.
  • Equipment catalog of Tambovpolymermash на сайте Тамбовполимермаш
    Equipment catalog of Tambovpolymermash

NEW TECHNOLOGIES GROUP

For sales and support please contact
Send your question now: